DWM control Hi-G dryer of reliable performance

It is well known that shale shaker is always used as the first stage treatment equipment both in solids control system for oil and gas drilling and drilling mud system for other kinds of drilling such as HDD, CBM and so on. It will separate the coarse solids out, and then the liquids will be delivered to cyclones for second and third stages treatment.

While normally the solids discharged from the shake shaker and cyclones is not dry enough to be thrown directly under the much more strict environmental regulations. So drilling waste management equipment is required to dry the solids. Besides vertical cuttings dryer for both oil-based mud cutting and water-based mud cutting, Hi-G dryer shaker is also can be used to treat water-based mud cuttings with a G force up to 8.0.

KOSUN Hi-G shaker has 4 pieces screens to acquire a large treating capacity. With Italy Oil or Martin shaker motors and stainless steel bottom deck, KOSUN Hi- G dryer shaker enjoys a reliable and stable performance in a High G force after heat treat.


Besides, KOSUN shale shaker with high API screens always used as the bottom drying shaker for desander cyclone, desilter cone. So the solids out from the cyclones will fall into the shaker screen for drying and also to collect more useful and clean mud. Generally 2 model of bottom shaker are optional. The first one has 2 screen with a relatively small treating capacity to save cost; the second one has 3 screens with relatively larger treating capacity. While sometime a mud cleaner will be chosen with bottom shaker screen to save space and cost. KOSUN vertical cutting dryer is used to treat oil-based mud cuttings, but KOSUN cuttings dryer can also treat water-base mud cuttings.